Pedestrian Bridge over the Taconic State Parkway

Designed by the New York State Department of Transportation, this bridge spans the entire 150ft width of the Taconic State Parkway in Mahopac, New York, providing pedestrian and bicycle access from one side of the Parkway to the other as a part of a recreational trail system. The bridge parapets and abutments were clad with granite stone consistent with the typical architectural treatment specified for use on the Taconic State Parkway.

The bridge is comprised of three 50ft precast concrete segments, each section weighing 113 tons. The precast concrete segments were erected on temporary towers. Closure pours joined the precast concrete segments at third points.

The segments were post-tensioned in the longitudinal direction for the entire span, eliminating the need for piers. High performance concrete (HPC) was specified and compressive strengths exceeding 10,000psi were achieved.

Project Details

City:

Yorktown
 

State:

NY
 

Owner:

New York State Department of Transportation, Region 8
 

Engineer:

New York State Department of Transportation
 

Contractor:

Granite Halmar Construction Company, Inc.
 

Total Length:

• 150ft
 

Structural Precast Elements:

• The bridge is comprised of three 50ft precast concrete segments, each section weighing 113 tons.
 

Resources

 
 
Back to